Digging up the right amplifier can be a load of tasks. Especially, when you have very minimum knowledge regarding the types of amps and their abilities. Here’s where we are to help you out! Check this article out to know tube amp vs. solid state.
History says tube amps and solid-state amplifiers date back to a few decades ago. Technological advancements made these two amps strong and useful over the years. They both now contain tremendous benefits for their own type of music. However, it’s pretty natural to get lost between the two. This article is dedicated to those people who want to learn about the tube amp vs. solid state information.
We have defined each of the amplifiers in this article. We divided them into sections to list down the pros and cons. This will help you which amp would be the best choice for you.
Let’s Start with Some History about Guitar Amplifiers
To research the best guitar amplifier, you must know about the history to some extent. It will help you to understand each amplifier’s origin and why it was invented. In fact, it will provide you with assurance about which amplifier would be best for you.
So, tubes age back to a very long time, nearly it was in the days of Thomas Edison. If we look back prior to World War II, we could see that all electronic amplifiers used to have tube designs. These devices were radio, telephone, early televisions, etc. Later, the transistor was invented and the technology shifted to transistors from tube technology.
Although transistors work pretty much like the tube amps, inventors created a lot of other amplifier models to lower down the minimum gap between transistors and tube amps. With amplifier development happening over years, now we have various choices such as all-tube, solid-state, digital, and hybrid model.
In the past, solid-state amps had a buzzing sound that didn’t really feel good. But now, solid states have better tuning and sometimes people choose them over tubes.
In the next section of this article, we will explain the facts, pros, and cons of Tube amp and solid-state to show you who wins the battle of tube amp vs. solid state.
Tube Amps Explained in Brief
Tube Amps work as a middle man between your guitar and the speakers. Here, a range of amplifiers is responsible for amplifying the guitar signal by sending it to the amplifier. After that, the amplifier pushes the tuning towards the speakers. Vacuum tubes are usually used to amplify the signal in this case.
Generally, the whole operation depends on how you treat them. By turning down the guitar volume, you will produce a clearer signal while hard tracks will give an aggressive output. Tube amps have some categories too. The power amps come in types like EL34, 6L6, 6550, KT88, etc. On the other hand, some preamp tube types are 12AX7, 12AT7, 12AU7, and so on.
Solid State Amps Explained in Brief
Unlike tube amps, solid-state amplifiers use a series of transistors instead of vacuum tubes. They have built-in semiconductors which don’t burn out just like overtime tubes. They remain just as solid they were. Hence, the name is justified.
The best thing about solid-state amps is that they are extremely inexpensive to manufacture. They also weigh a lot let than the tube amps. This makes them superior to tube amplifiers to some extent.
Keep reading because we are about to see a battle between tube amps and solid states.
So, are you ready for tube amp vs. solid state?
Tube Amp vs. Solid State
Now, that we have reached the ultimate point of our article, we will see the pros and cons of each amplifier. By evaluating the positive and negative aspects of the amps, we will decide which amplifier is the winner.
Analog clear sound
Best suitable for classic tones
Extremely easy to replace tubes
Super loud tuning
Produces warm tones
Consumes a lot of energy
Costs too much to build and repair
Needs constant supervision
The valves are not too much long-lasting
Costs less than tube amps
Consumes less energy
Possible to use in low watt at home
Holds the same tone every time you play
Can’t produce warm tones
Less dynamic and responsive
Repairing is hard
So, now you may ask – which one is better? To be honest, there is no exact answer. As you can see both of the amplifiers have much quality to outweigh one another. That’s why the best thing you can do is to look out for your requirements.
Suppose, you want a warmer tone that is loud and clear enough for a big room, then you must choose a tube amp. On the contrary, if you want to rock in your home jam session, a solid-state amp would do just fine. Keep in mind that, your tone preferences, environmental needs, and budget should be the utmost priority while purchasing an amplifier for your guitar.
It’s true that technologies have evolved through the past decades and so did amplifiers. Though tube amps were invented before solid-state amplifiers, they still have popularity among the mass people. Especially, those who love to play in classic retro style, tube amps are perfect for them.
On the other hand, solid-state amps are comparatively a newer generation. They cut the costs way too much than tube amps. Less in price but higher in quality! The basic tube amp vs. solid state quality is the overdrive circuits. You will feel the soft warm clipping with a rounded overdrive in the case of tube amps. However, solid-state amps have a harsh sound.
So, we recommend you purchase the amplifier that best suits your guitar and your taste in music. Tube amp or solid-state, they both are wonderful in operation.
You can also read: How to Record Music: A Guide for Beginners