AirPods are amazing. The quality of sound is unlike any other. So playing music and talking to others feels pretty good. Now imagine you’re in an important work call and suddenly, your AirPods mic stops working. You can’t throw in your pitch anymore. What a nuisance!
Like every other wireless product, AirPods are not without their flaws. Wireless technology can be fickle. Especially since the number of signals increases exponentially. This is why we’re here to help you narrow down the symptoms of your problem and find the solutions for it!
Why Your AirPods Mic is Not Working
There could be a multitude of reasons why your AirPods mic suddenly stops working. Wireless technology is unpredictable. Luckily, most of these problems can be easily solved. Take a look at some of the potential reasons why your microphone stopped working.
1. It’s not sufficiently charged.
The most common reason for which the AirPods microphone doesn’t work is low battery. This is a quick fix. All you need to do is put the AirPods back in the case and place it on charge.
2. It accumulated dust.
Yep, you read it right. Too many dust particles can interfere with the microphone. This way, your voice wouldn’t be registered properly. It typically happens when you drop one of your AirPods or leave them out in the open regularly.
3. There’s a connectivity issue.
Sometimes, the problem is a simple pairing issue. Maybe your device isn’t picking up the AirPods signal. Or maybe it’s still connected with the previous device you used. Either way, just disconnect and reconnect.
4. The AirPods are damaged.
This is perhaps the worst case scenario. The microphone will obviously not work if the AirPods are damaged beyond repair. You might need to consider repairing or replacing them.
Things to Do When Your AirPods Mic Is Not Working
Now that you know about the four potential symptoms, let’s look at the solutions. These fixes should sort out your problems quickly!
A Simple Reconnection
Honestly, the simplest way is often the most effective one. Try putting your AirPods back in the case and re-establish the connection. If your mic was working just fine a while back, it’s probably not a major technical or hardware issue. This is why repairing helps the problem get sorted. Just follow these steps.
Step 1: Turn off Bluetooth.
Step 2: Place your AirPods in the case for a few seconds.
Step 3: Turn on Bluetooth and pair again.
This should do the trick! Or you can repair it from scratch.
Step 1: Remove the AirPods from the list of paired devices.
Step 2: Put it back in the case and close the cover.
Step 3: Press the button on the case for a few seconds and wait for it to light up.
Step 4: Pair your device with the AirPods again.
A Little Cleansing
When we say “clean” the microphone, we don’t mean strong scrubs. All you need is a dry, soft cotton swab. That, or a brush with soft bristles. This will help you clear out any dust. It’s best to clean the speaker mesh occasionally too.
Whatever you do, just be easy on the device! It should work in a jiffy. Where is the microphone located? AirPods actually come with two noise-canceling microphones. It’s that thin silver lining at the bottom of the earbud shaft.
A Surge of Charge
Remember how we mentioned it could be a battery issue? It most likely is. Especially if the mic was working fine just a moment ago. Put it back in the case and let it charge. If you think the battery runs out quickly, you can turn on autodetection. This will prevent the battery from draining while not in use.
Look into the Firmware
AirPods won’t work on outdated firmware. Here’s how you can check whether the AirPods are compatible with the device.
Step 1: Go to Settings and click on general.
Step 2: Press the About button and find your AirPods.
Step 3: Look up the current Firmware version.
Step 4: Update the firmware if it’s out of date.
Wondering how to do that?
Step 1: Leave your AirPods in the case near your cellular device (make sure it’s connected to the internet)!
Step 2: Come back after half an hour to see the job done.
Technology is wonderful, isn’t it?
Revamp your Cellular Device
Whether you’re using Android or Apple, restarting your device should fix your mic. AirPods mic stops working for numerous reasons. You often can’t pinpoint them. So if the previous steps don’t do the trick, just simply press your power button to get started.
Consult the Expert
When all else fails, you should reach out to an Apple Care center. You won’t be able to solve a hardware issue on your own. Their consultation should help you come up with a possible solution.
If you’re facing audio issues then there’s probably a lot of interference. Bluetooth devices require a strong, unwavering connection to function properly. If the people you’re speaking to are listening to a lot of static, you need to move into a different room. Static can be caused by the presence of multiple devices. It’s an easy fix!
Repair or Replace
When all else fails, it’s time to say goodbye to your beloved AirPods. Microphones play a huge role in headsets. So when your AirPods mic stops working, there’s little use for the device. Especially if you primarily use it for communication. Either your AirPods are defective or they were damaged. A repair or replacement is due!
If your AirPods microphone stops working, it’s simply unfortunate. If the worst-case comes, you should consider replacing them. We know how important it is to keep up your daily communication. This is why we listed all the potential solutions to this problem. At least one of them should resolve your issue!
You can also read: How To Connect Apple AirPods To Android Devices